Answers to most ATM PINGuard questions can be found on this page, but if you require assistance please don’t hesitate to get in touch.

Are any tools required for ATM PINGuard installation?

No, all components and tools are supplied as standard in the box.

How strong is the adhesive?

The bond is incredibly strong and on some PINGuard versions the bond can reach over ¼ of a ton.

What temperatures can the adhesive work to?

Although the adhesive needs to be fitted above 10°C (50°F) once it has cured then it can cope with extreme temperatures from -35°C (-31°F) to 138°C (280.4°F) (in extreme cold conditions the key pad is usually heated to prevent freezing so the likelihood of the surface temperature going below -35°C is extremely unlikely).

Does the ATM PINGuard™ comply with the DDA (disability discriminations act) and ADA (American Disabilities Act)?

PINGuard™ has been designed to meet both the DDA and ADA requirement. Every reasonable means has been made to ensure that disabled people are not discriminated against. We also have special additional accessories that can further help disabled persons.

Does the PINGuard™ meet the PCI standard?

The EVO1i PINGuard has been designed to meet the PCI standard for PIN shields for unattended PIN entry devices.

Can the ATM PINGuard™ be bolted down?

Yes the PINGuard™ can be bolted down to the ATM for added strength.
bolted ATM PINGuard

How much does the PINGuard™ cost?

For full a current price please email us at sales@pinguard.com or call +44 1621 786365. Prices start from just $50.

How long does it take to install?

The standard PINGuard™ can be installed in 10 to 15 minutes. Physical fixing takes between 1-2 hours.

Can I remove the PINGuard™ if it’s no longer needed?

An ATM PINGuard removal kit can be used to completely remove the PINGuard™. A small amount of residue tape is sometimes left over but this can be cleaned or scrapped off.

Will the ATM be damaged if the PINGuard™ is attacked?

The PINGuard™ is designed to be sacrificial to the ATM so if it suffers a very heavy attack the adhesive will yield just before any damage to the ATM fascia occurs.

Will less people use the ATM once the PINGuard™ is fitted?

If PINGuards™ are have never been fitted in an area or country before then we expect to see a fall of 1% to 2% in foot fall for the first 6 months. But after this we see usage return to normal as customers get used to the system. Also advertising and customer awareness greatly helps keep the usage figure as normal or slightly increase as people prefer the added security.

Does it reduce crime?

You should expect to see an immediate and drastic drop in shoulder surfing and camera attacks at ATMs.

Will the PINGuard™ be vandalised?

The PINGuard™ is incredibly strong and uses the highest grade materials. It can survive attacks with a hammer and can also survive a 1 ton car driving over it and remain operational. Additionally to this if any parts are damaged they can easily be replaced with our spare components.

Can the PINGuard™ protect against attacks by thermal imaging cameras?

pinguardheatpics